Справочник Пользователя для Tektronix 071-1631-04

Getting Started

AFG3000 Series Quick Start User Manual

The AFG3000 series arbitrary/function generator communication interface allows you to communicate with or remotely 
control your instrument. You can use a USB, Ethernet, or GPIB interface.

The USB interface requires no front panel or bezel menu operations to set up. Use a USB cable to connect your instrument 
to a PC.

To connect your instrument to a network, you must first obtain information from your network administrator. The procedure 
for entering the Ethernet network parameters depends on your network configuration. If your network supports DHCP 
(Dynamic Host Configuration Protocol), follow these steps:

1. Connect a LAN cable to the LAN port 

on the rear panel.

2. Push the front-panel Utility button.

3. Push the I/O Interface > Ethernet 

bezel buttons.

4. The Ethernet Network Settings menu 

is displayed.

By selecting the DHCP On, the instru-
ment can set its network address auto-
matically through DHCP.