Справочник Пользователя для Vestax PMC-270A

28

30

31

34

33

35

32

29

REAR PANEL

28. POWER SWITCH

The first LED of MASTER OUT LEVEL METER
that is located on the top panel is lit when on.

29. AC POWER CABLE
30. OUTPUT JACK(1/4inch PHONE JACK, RCA PIN JACK)

Connect to the input of power amplifier.

31. EFFECT SEND JACK

Connect the SEND jacks to the input of an
external effector unit(Delay,Reverb etc) 

32. EFFECT RETURN JACK

Connect the RETURN jacks to the output of the
effector.

33. PHONO INPUT JACK 

Input jack for PGM1,PGM2 and SUB channel
turntables.
Connect turntables equipped with the MM pick up
cartridge only.

34. LINE INPUT JACK

Input connectors for the line level equipment such
as CD players, tape decks, DATs, MDs.

35, GROUND TERMINAL

Connect this terminal to the ground lead of the
turntable. This helps to reduce noise and hum.

REAR PANEL

ISOLATOR SECTION

25,  HI SWITCH

Allows cutting off the sound of treble range. Sound volume will be
cut when the switch is set downwards. When the switch is put back,
the output volume returns to normal. Can be useful for cutting off
the sound of the cymbals or high hats for example.

26,  MID SWITCH

Allows cutting off the sound of the middle range.  Sound volume will
be cut when the switch is set downward position. When the switch
is put back, the output volume becomes normal sound volume. Can
be used for cutting off vocal and melody from the source.

27,  LOW SWITCH

Allows cutting off the sound of the bass range. Sound volume will be
cut when the switch is set downward. When the switch is put back,
the output volume return to normal. Can be utilized for creating the
effects of an acapella.

25

26

27

ISOLATOR SECTION