Справочник Пользователя для Roland Piano
195
Transmitting Sound Settings/Reset to Default Factory Settings
Transmitting Sound Settings/Reset to Default Factory Settings
Transmitting Data to User Memory
Patch, rhythm set, multitimbre, and performance settings will be
transmitted to user memory. Use this when you want to arrange
sounds in user memory in the desired order.
transmitted to user memory. Use this when you want to arrange
sounds in user memory in the desired order.
If the Fantom internal memory already contains important data
that you have created, this operation will cause all of this data to
be lost. If you wish to keep the data, you must save it on a disk
(p. 189) or on an external MIDI device (p. 194).
that you have created, this operation will cause all of this data to
be lost. If you wish to keep the data, you must save it on a disk
(p. 189) or on an external MIDI device (p. 194).
1.
Press [MENU] to open the Menu window.
2.
Press
or
to select “Data Transfer,” and then press
[8 (Select)].
The Data Transfer window appears.
3.
Move the cursor to “Destination,” set it to “USER,” and
specify the first number of the transmission destination.
fig.17-03.e
4.
Move the cursor to “Source,” and use the following choices
to specify the data that will be transmitted.
* Depends on the Wave Expansion Board installed.
Type of Data to Transmit
PATCH:
Patch
RHYTHM:
Rhythm set
MULTITIMBRE:
Multitimbre
PERFORMANCE:
Performance
Transmit Source Data
USER:
Data from user memory will be transmitted.
PR-A–E, PRST:
Preset data will be transmitted.
XP-A–C:
Data from an Wave Expansion Board will be transmitted.
5.
Press [8 (Execute)] to execute data transmission.
While the data is being transmitted, the display will indicate
“Processing...” When “Complete !” is displayed, the
transmission has been completed.
“Processing...” When “Complete !” is displayed, the
transmission has been completed.
• “XP-A–C” can be selected only if the corresponding Wave
Expansion Board is installed.
• If the specified data will not fit completely into the transmission
destination, as much of the data as will fit will be transmitted,
starting at the first number of the specified transmission
destination.
starting at the first number of the specified transmission
destination.
(Example)
fig.17-03a_50
If the above settings are made and transmission is executed, only the
two PR-A group patches 001 and 002 will be transmitted to USER
group patches 127 and 128.
two PR-A group patches 001 and 002 will be transmitted to USER
group patches 127 and 128.
Reset to Default Factory
Settings (Factory Reset)
This restores all data in the Fantom to the factory-set condition
(
(
Factory Reset
).
If there is important data you’ve created that’s stored in the
Fantom’s internal memory, all such data is discarded when a
Factory Reset is performed. If you want to keep the existing data,
save it on a disk (p. 189) or transmit it to an external MIDI device
and save it (p. 194).
Fantom’s internal memory, all such data is discarded when a
Factory Reset is performed. If you want to keep the existing data,
save it on a disk (p. 189) or transmit it to an external MIDI device
and save it (p. 194).
1.
Press [MENU] to open the Menu window.
2.
Press
or
to select “Factory Reset,” and then press
[8 (Select)].
The Factory Reset window appears.
ffig.17-04_50
3.
Press [8 (Execute)] to execute the Factory Reset.
When the display indicates “Complete !,” the factory reset
operation has been completed.
operation has been completed.
Type of data to transmit Transmit source data
PATCH
PR-A–E
001–128
XP-A–C
001–*** (*)
RHYTHM
PRST
001–016
XP-A–C
001–*** (*)
MULTITIMBRE
PRST
01–16
PERFORMANCE
PRST
01–64
Type of data to transmit
Transmit destination
First number of the transmit destination
Transmit source data
Last number of the transmit destination:
This is set automatically according to the
number of transmit source data items.
This is set automatically according to the
number of transmit source data items.