Справочник Пользователя для Roland Piano

The Fantom has three sound generating modes: Patch mode, 
Multitimbre mode, and Performance mode. You can select the sound 
generating mode (state) that is most appropriate for how you are 
playing the Fantom.

Use the following procedure to switch between these modes.

The Mode window appears.

fig.01-12_50

When you select a mode, the PLAY screen of the corresponding 
mode appears. In each mode, the upper left of the PLAY screen 
will indicate the mode.

fig.01-13

fig.01-14

This mode is used to play individual sounds (patches or rhythm 
sets) from the keyboard. If a rhythm set is selected, you can play 
percussion instruments from the keyboard.

The keyboard controller section and the sound generator section are 
connected by a single MIDI channel (the patch receive channel).

fig.01-15

This mode is suitable when you are using the sequencer to create a 
song, or when playing song data. When creating songs or playing 
song data, a different MIDI channel is assigned for each patch used 
in a part. Such a set of sounds selected for each part to play is called 
a 

.

The keyboard controller section and the sound generator section are 
connected by a single MIDI channel (the receive channel of the 
current part).

fig.01-16

This mode allows you to combine multiple sounds (patches or 
rhythm sets) to create complex setups, or to use the Fantom as a 
master keyboard. You can play patches together (Layer) or divide 
the keyboard into two regions and play different patches in each 
region (Split).

The keyboard controller section and sound generator section are 
connected according to the zone settings.