Справочник Пользователя для Roland Piano

 Raises the pitch in semitone steps (up to 4 octaves 

higher).

 Lowers the pitch in semitone steps (up to 4 octaves 

lower).

 Aftertouch

 Play the sound of the most recently pressed key.

 Raises the key range in octave steps (up to 3 octaves 

higher).

 Lowers the key range in octave steps (up to 3 octaves 

lower).

 Starts/Stops the sequencer.

 Tap tempo (a tempo specified by the interval at which 

you move your hand over the D Beam controller).

 Switch Rhythm pattern playback on/off.

 Rhythm Pattern Accent Rate

 Rhythm Pattern Shuffle Rate

Switch the polarity of the D Beam controller.

With a setting of “REVERSE,” the direction of control for the D Beam 
controller will be inverted.

: STANDARD, REVERSE

Specify the lower limit of the range of the D Beam controller. Values 
below this setting will not be output.

 0–UPPER

Specify the upper limit of the range of the D Beam controller. Values 
above this setting will not be output.

 LOWER–127

For details regarding effect settings, refer to the pages shown 
below.

•

•

•

•

fig.04-12_50

For details on the setting, refer to 

With rhythm tones, sounds are created by combining up to four 
Waves (eight for stereo).

Select the groups containing the Waves comprising the rhythm tone.

 Waveforms stored in internal memory

 Waveform stored in a Wave Expansion Board (SR-JV80 series) 

installed in EXP-A slots.

 Waveforms residing on a Wave Expansion Board (SRX series) 

installed in the EXP B slot

 Waveforms residing on a Wave Expansion Board (SRX series) 

installed in the EXP C slot

You cannot select a waveform group of a Wave Expansion Board 
that is not installed.

The Waves for the bass drum, snare, hi-hat, toms, and other 
percussion instruments are each assigned to one rhythm tone. 
When adding 3D effects to the sound, make the Pan settings for 
each rhythm tone individually.