Справочник Пользователя для Roland VS-1824
89
Chapter 6 Mixer Channel Strip Detail
Chapter 6
[F3 (FX3In)] Effect 3 Insert
After pressing [F3 (FX3In)], or moving the cursor to the
FXIns area, press [ENTER].
FXIns area, press [ENTER].
FX3 (Effect Insert Switch)
This sets how the effect is connected in the mixer.
Off:
The effect is not inserted in the channel.
Ins:
Both channels of the stereo effect are inserted into the
channel.
channel.
InsL:
The left channel of the effect is inserted into the mixer
channel.
channel.
InsR:
The right channel of the effect is inserted into the mixer
channel.
channel.
InsS:
Each channel of the effect is inserted in series into the
mixer channel. In other words, it is sent through one side
of a stereo effect before it passes through the other side
of the effect.
mixer channel. In other words, it is sent through one side
of a stereo effect before it passes through the other side
of the effect.
* When Ins or InsS is selected, that effect cannot be inserted on
any other channel. When InsL or InsR is selected, that effect
can be inserted only on one other mixer channel. If the name of
an input or track appears as the Insert Switch setting, the
effect is already being inserted in the displayed input or track.
You will need to select the input or track that is using that
effect and turn its Effect Insert Switch off. Remember that
effects can be inserted in the MIX bus as well (p. 105).
can be inserted only on one other mixer channel. If the name of
an input or track appears as the Insert Switch setting, the
effect is already being inserted in the displayed input or track.
You will need to select the input or track that is using that
effect and turn its Effect Insert Switch off. Remember that
effects can be inserted in the MIX bus as well (p. 105).
Snd (Insert Send Level)
This adjusts the level of signal (-42 dB to +6 dB) sent to the
effect. The default setting is 0 dB.
effect. The default setting is 0 dB.
Rtn (Insert Return Level)
This adjusts the level of signal (-42 dB to +6 dB) returned
from the effect. The default setting is 0 dB.
from the effect. The default setting is 0 dB.
[F4 (FX4In)] Effect 4 Insert
After pressing [F4 (FX4In)], or moving the cursor to the
FXIns area, press [ENTER].
FXIns area, press [ENTER].
FX4 (Effect Insert Switch)
This sets how the effect is connected in the mixer.
Off:
The effect is not inserted in the channel.
Ins:
Both channels of the stereo effect are inserted into the
channel.
channel.
InsL:
The left channel of the effect is inserted into the mixer
channel.
channel.
InsR:
The right channel of the effect is inserted into the mixer
channel.
channel.
InsS:
Each channel of the effect is inserted in series into the
mixer channel. In other words, it is sent through one side
of a stereo effect before it passes through the other side
of the effect.
mixer channel. In other words, it is sent through one side
of a stereo effect before it passes through the other side
of the effect.
* When Ins or InsS is selected, that effect cannot be inserted on
any other channel. When InsL or InsR is selected, that effect
can be inserted only on one other mixer channel. If the name of
an input or track appears as the Insert Switch setting, the
effect is already being inserted in the displayed input or track.
You will need to select the input or track that is using that
effect and turn its Effect Insert Switch off. Remember that
effects can be inserted in the MIX bus as well (p. 105).
can be inserted only on one other mixer channel. If the name of
an input or track appears as the Insert Switch setting, the
effect is already being inserted in the displayed input or track.
You will need to select the input or track that is using that
effect and turn its Effect Insert Switch off. Remember that
effects can be inserted in the MIX bus as well (p. 105).
Snd (Insert Send Level)
This adjusts the level of signal (-42 dB to +6 dB) sent to the
effect. The default setting is 0 dB.
effect. The default setting is 0 dB.
Rtn (Insert Return Level)
This adjusts the level of signal (-42 dB to +6 dB) returned
from the effect. The default setting is 0 dB.
from the effect. The default setting is 0 dB.
[F1 (Link)] Channel Link
Use this setting to link or unlink adjacent mixer channels.
Linking adjacent channels allows you to control both sides of
a stereo pair with a single set of parameters.
Linking adjacent channels allows you to control both sides of
a stereo pair with a single set of parameters.
On:
Adjacent channels are linked.
Off:
Adjacent channels are not linked.
[F2 (ATT)] Attenuation
Lowers or boosts the volume level (-42 dB to +6 dB) of the
channel.
channel.