Справочник Пользователя для Zoom MRT-3
Setting the Precount for Real-Time Recording
The MRT-3 can perform a countdown before the start of real-time recording. The number of
precount measures can be changed, and precount can also be turned off. This setting affects all
patterns.
precount measures can be changed, and precount can also be turned off. This setting affects all
patterns.
1.
In pattern mode, press the [FUNCTION] key and then pad 2 (PRE COUNT).
The current precount setting is shown on the display (default setting: 1).
2.
Use the [VALUE +/-] keys to select one of the following settings.
0:
No precount
1:
Precount of 1 measure
2:
Precount of 2 measures
PAd: Recording starts when any pad is hit.
When "PAd" is selected, holding down the [REC] key while pressing the [PLAY] key in pattern mode
brings up the indication "rEAdy" on the display, and the unit goes into recording standby mode.
brings up the indication "rEAdy" on the display, and the unit goes into recording standby mode.
3.
When the setting is complete, press the [FUNCTION] key again.
The unit returns to the previous mode.
H
INT
1
ZOOM
MRT-3
48
Other
Functions