Справочник Пользователя для Edirol R-4Pro
48
Finder functions
* You cannot move a project between the hard disk and an external memory device. If you need to do this, you can
first copy the project, and then delete the copy source project.
fig.finder-1.eps
1
While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2
In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select the project that you
want to move. Then press the [ENTER] button.
buttons or the [SCRUB] dial to select the project that you
want to move. Then press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you
can press the [CURSOR] right button to move into the selected folder (i.e., move to a lower-
level folder).
If you want to move back to the upper-level folder, press the [CURSOR] left button.
can press the [CURSOR] right button to move into the selected folder (i.e., move to a lower-
level folder).
If you want to move back to the upper-level folder, press the [CURSOR] left button.
fig.finder-cf.eps
* If you want to select the external memory device, select the hard disk
(HD) and then press the [CURSOR] left button to show the
external memory device (EX). However, if the external memory device
is not mounted, it will not be displayed. See Connection and
removal (p. 79)
external memory device (EX). However, if the external memory device
is not mounted, it will not be displayed. See Connection and
removal (p. 79)
* Press the [CURSOR] right button after selecting EX to reference the
external memory device contents.
fig.finder-move1.eps
3
When the screen shown in the figure is displayed, use the
[CURSOR] buttons to select
[CURSOR] buttons to select
5 Move
.
fig.finder-move2.eps
4
Use the [CURSOR] up/down buttons or the [SCRUB/
VALUE] dial to select the destination folder (the folder to
which you want to move the project). Then press the
[ENTER] button to execute the Move operation. You can
also select HD (hard disk) as the destination.
VALUE] dial to select the destination folder (the folder to
which you want to move the project). Then press the
[ENTER] button to execute the Move operation. You can
also select HD (hard disk) as the destination.
* If you decide to cancel without moving, press the [EXIT] button.
fig.finder-move3.eps
Do not turn off the power while a project is being moved.
Moving a project (Move)
R-4_e_new.book 48 ページ ２００６年１１月２０日 月曜日 午後１時９分