Справочник Пользователя для Edirol UA-1000
19
Preparations for using the UA-1000
7
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
8
Click the Windows
start
button. From the menu that appears, select
“Run...”
The
“Run...”
dialog box will appear.
fig.2-3
9
In the dialog box that appears, input
the following into the
the following into the
“Open”
field,
and click
[OK]
.
(drive name) :\Driver\USB_XP\SETUPINF.EXE
* In the explanatory example shown here, the drive name is given as
“D:”
. The drive name
“D:”
may be different for your system. Specify the drive name of your CD-ROM drive.
10
The SetupInf dialog box will appear.
You are now ready to install the driver.
11
Use the USB cable to connect the UA-1000 to your computer.
1.
With the
power switch
turned
OFF
, connect the
power cord
to the
UA-1000
.
2.
Connect the
power cord
to an electrical outlet.
3.
Use the
USB cable
to connect the
UA-1000
to your
computer
.
12
Set the UA-1000’s
power switch
to the
ON
position.
Near the task bar, your computer will indicate
“Found New Hardware.”
Please
wait.
13
The
Found New Hardware Wizard
will appear.
Select
“Install from a list or specific location (Advanced),”
and click
[Next]
.
If the screen indicates
“Windows can perform the
“Windows can perform the
same action each time you
insert a disk or connect a
device with this kind of file,”
click [Cancel].
To check the drive name
Click the start button, and
choose My Computer from the
menu that appears. In the
window that appears, check
the drive name of the CD-
ROM drive into which you
inserted the CD-ROM in step
7. The drive name is the (D:) or
(E:) displayed by the CD-ROM
choose My Computer from the
menu that appears. In the
window that appears, check
the drive name of the CD-
ROM drive into which you
inserted the CD-ROM in step
7. The drive name is the (D:) or
(E:) displayed by the CD-ROM
drive
.
Once the connections have
been completed, turn on
power to your various devices
in the order specified. By
turning on devices in the
wrong order, you risk causing
malfunction and/or damage to
speakers and other devices.
been completed, turn on
power to your various devices
in the order specified. By
turning on devices in the
wrong order, you risk causing
malfunction and/or damage to
speakers and other devices.
This unit is equipped with a
protection circuit. A brief
interval (a few seconds) after
power up is required before
the unit will operate normally.
protection circuit. A brief
interval (a few seconds) after
power up is required before
the unit will operate normally.
UA-1000_e.book 19 ページ 2003年8月6日 水曜日 午前11時52分