Справочник Пользователя для Pelco C586M
Pelco Manual C586M (9/99)
23
MENUS
To program from the keyboard, the keyboard must be in main monitor mode. Press the
MAIN MONITOR key.
MAIN MONITOR key.
SYSTEM SETUP (View Key)
To program the main basic system parameters:
1.
Press the MAIN MONITOR key.
2.
Use the number keypad to enter the address of the multiplexer (1-16 if the keyboard is
connected to a multiplexer; 1-8 if the keyboard is connected to a server), then press
the UNIT key.
connected to a multiplexer; 1-8 if the keyboard is connected to a server), then press
the UNIT key.
3.
Press the VIEW key for approximately three seconds. Type the password, if requested.
The password must be entered by pressing each number key followed by pressing the
CAM key. The System Setup menu appears (refer to Figure 8). The currently selected
menu item blinks.
The password must be entered by pressing each number key followed by pressing the
CAM key. The System Setup menu appears (refer to Figure 8). The currently selected
menu item blinks.
4.
Use the joystick to move between items on the screen. When the menu item you
desire is highlighted (blinking), do one of the following:
desire is highlighted (blinking), do one of the following:
•
If a menu item has more than one option, press the OPEN key to cycle through
the options to select the one you want.
the options to select the one you want.
•
If a menu item has only one option, press the OPEN key to select it.
Time and Date
Set the current time and date. The time uses a 24-hour clock.
Set the current time and date. The time uses a 24-hour clock.
Time Display
ON - Displays the time on the main monitor.
OFF - The time is not shown on the main monitor.
ON - Displays the time on the main monitor.
OFF - The time is not shown on the main monitor.
Title Display (Duplex Multiplexer)
ON - Displays camera titles and the word LIVE or VCR on the main monitor.
OFF - Camera titles and the word LIVE or VCR are not shown on the main monitor.
ON - Displays camera titles and the word LIVE or VCR on the main monitor.
OFF - Camera titles and the word LIVE or VCR are not shown on the main monitor.
Title Display (Simplex Multiplexer)
ON - Displays camera titles on the main monitor.
OFF - Camera titles are not shown on the main monitor.
ON - Displays camera titles on the main monitor.
OFF - Camera titles are not shown on the main monitor.
TIP:
Once you are in a
menu, you can go to
another menu by pressing
the key(s) for that menu.
Press and release the VIEW
key to switch to the system
setup menu. Enter a camera
number and then press and
release the CAM key to
change to a camera menu.
Press and hold the SEQ
and LIVE/VCR keys to
switch to the sequence and
record menus.
another menu by pressing
the key(s) for that menu.
Press and release the VIEW
key to switch to the system
setup menu. Enter a camera
number and then press and
release the CAM key to
change to a camera menu.
Press and hold the SEQ
and LIVE/VCR keys to
switch to the sequence and
record menus.
TIP:
In any menu you can
scroll the options forward by
pressing the OPEN key or
scroll backward by pressing
the CLOSE key.
pressing the OPEN key or
scroll backward by pressing
the CLOSE key.
NOTE:
Title Display shows a
maximum of 12 characters in
all modes except 16-camera
display, in which only 9
characters are shown.
all modes except 16-camera
display, in which only 9
characters are shown.
Figure 8. Basic System Setup Menu
2/6/8 Hr
2/6/8 Hr
MAIN MONITOR VIDEO
RESET ACTIVITY DETECTION ALL CH TO
*2,6,or 8 Hr 120 Hr
12 Hr
12 Hr
168 Hr
16 Hr
180 Hr
18 Hr
240 Hr
24 Hr
360 Hr
48 Hr
480 Hr
72 Hr
600 Hr
84 Hr
720 Hr
96 Hr
960 Hr
HIGH RESOLUTION
REDUCED FLICKER
REDUCED FLICKER
MAIN MONITOR DISPLAY HIGH RESOLUTION
**
* 2/6/8 HR FOR NTSC/EIA MODEL MULTIPLEXERS, 3 HR FOR PAL/CCIR MODELS.
REMAINING RECORD SPEEDS DEPEND UPON VCR MODEL.
** NOT SHOWN ON DUPLEX MONOCHROME MODELS OR SIMPLEX MULTIPLEXERS
**