Справочник Пользователя для Roland RG-3M
82
Chapter 5. User Program Registration
Saving Performance Settings (User Program)
You can register up to 36 User Programs to the RG-3M.
1.
Set the Tone, and other data until the settings are the way you
want them.
want them.
2.
Press the [Function] (Exit) button, getting its indicator to light.
3.
Press the [Song] (Select -) button or [
] (Select +) button to
display the USER PROGRAM screen.
fig.05-020d
4.
Press the [Song] (Select -) button or [
] (Select +) button so
“WRITE” is flashing.
fig.05-030d
5.
Press the [Moving Key] (Enter) button.
The following screen appears.
fig.05-040d
6.
Press the [
] (Value -) button or [
] (Value +) button to
select the write-destination number.
Select a number from UPG 01 to UPG 36 as the performance settings write
destination.
destination.
fig.05-050d
7.
Press the [Moving Key] (Enter) button.
A confirmation message appears in the screen.
fig.05-060d
8.
Press the [Moving Key] (Enter) button.
The currently selected performance settings are registered, and the USER
PROGRAM screen returns to the display.
PROGRAM screen returns to the display.
9.
Press the [Function] (Exit) button so the indicator goes out.
For more on what can be
registered to a User Program,
refer to “Parameters Stored in
the User Program” (p. 117).
registered to a User Program,
refer to “Parameters Stored in
the User Program” (p. 117).
RG-3M_e3.book 82 ページ ２００８年３月２５日 火曜日 午前１０時１分