Листовка для PYLE Audio PPDLSM

PPDLSM

 

METAL DISTORTION 

1. The LEVEL control adjusts the output level. 

 
2. The LOW control allows you to boost/cut the low-frequency 

range. 
 

3. The HIGH control allows you to boost/cut the high-f
range. 

requency 

able. 

. The 1/4 TS OUT connector sends the signal to your amp.  

Use the DC IN connection to plug in a 9v power supply (not included). The Battery Compartment is 

 

his effects pedal has no on/off switch. As soon as you insert the jack into the Input connector, the 

 TS Impedance 500k 

e Center 

A 

 x 2.12”H 

stall near heat sources. Use only authorized attachments / accessories. 

 

 

4. The DIST control adjusts the amount of distortion effect and 
the length of the resulting sustain. High distortion settings will 

allow for extremely long sustaining tones. 

 

5. The ON/BATT LED illuminates when the effect is activated. 
It also serves as a battery level indicator. 

 
6. Use the Footswitch to activate/deactivate the effect. 
 

7. Use this 1/4 TS IN connector to plug in the instrument c
 

8

 

located underneath the pedal cover. To install or replace the 9v battery, press the hinges with a pen 

and remove the pedal cover. 

T

pedal will turn on. When not in use, remove the jack from the input connector to save the batteries. 

 

S
Input Connector: 1/4

Output Connector: 1/4 TS Impedance 1k 
Power Supply: 9V, 100mA DC regulated 

Power Connector: 2mm DC Jack, Negativ
Battery: 9v Type 6LR61 

Power Consumption: 30m
Dimensions: 4.9”D x 2.76”W

Weight approx. 0.33kg (0.73lbs) 
 
S

Do not use near water, or in
Do not service product yourself. Contact our service department with any questions or to schedule 

repair service.