Справочник Пользователя для Panasonic AG-HMX100E
28
Basic Oper
ation
To set the operation of AUX and MIC
faders
faders
Set [AUX/MIC] to [PAIR] or [SEPA.] (separate) using the
rotary 3 control. The operation of each fader varies with the
setting as described in the table shown below.
rotary 3 control. The operation of each fader varies with the
setting as described in the table shown below.
Setting
AUX fader
MIC fader
PAIR
L and R channels of
AUX input source
AUX input source
L and R channels of
MIC input source
MIC input source
SEPA.
L channel of AUX (or
MIC) input source*
MIC) input source*
1
R channel of AUX (or
MIC) input source*
MIC) input source*
1
*
1
To adjust the audio level of the microphone, operate the
fader while holding down the SHIFT key.
[INT VIDEO] Menu
(Internal Video Setting) Screen
(Internal Video Setting) Screen
When the INT VIDEO button is pressed, the [INT VIDEO]
menu screen appears as shown below.
menu screen appears as shown below.
This menu is used to set the internal video signal built in
this unit.
this unit.
During color setting in the [INT VIDEO] menu, the joystick
and rotary Z control are in the color setting mode.
The color set from this menu is indicated in the internal
video display area.
and rotary Z control are in the color setting mode.
The color set from this menu is indicated in the internal
video display area.
BACK
PATTERN GRADE
MODE
WHITE
H1
0
WRITE
FRAME
1
MATTE
BAR
2
255
COLOR
LEVEL
FRAME
PAGE
COLOR
MEMORY
WASH
EVENT
INT VIDEO
GRADE POS 80
ME TIME
PATTERN
INT
00
E
1:00
F
3001 BLUE
P
B
128
Y 196
P
R
128
WHT
YELW
CYAN
GREN
MGT
RED
BLUE
BLK
CST 1
CST 2
CL BR
ST # *
1
MV # *
1
*
1
# stands for a numeric value. (The maximum value varies
with the memory size (the number of frames) set in the
[MEMORY] submenu of the [SETUP] menu.)
[MEMORY] submenu of the [SETUP] menu.)
To set the audio output format and the operation of audio faders
Set [SOURCE] to [CP PAIR], [BUS SEP1], [BUS SEP2], [12 PAIR], or [12 SEPA.] using the rotary 2 control.
The following table shows the output method and audio input sources assigned to the faders for each setting.
Setting
Output Method
SOURCE 1/5 Fader
SOURCE 2/6 Fader
SOURCE 3/7 Fader
SOURCE 4/8 Fader
CP PAIR
Sound output of the
selected input source
selected input source
L and R channels of source
1 (or 5)
1 (or 5)
L and R channels of source
2 (or 6)
2 (or 6)
L and R channels of source
3 (or 7)
3 (or 7)
L and R channels of source
4 (or 8)
4 (or 8)
BUS SEP1
L channel of A/PROG
source
source
R channel of A/PROG
source
source
L channel of B/PRESET
source
source
R channel of B/PRESET
source
source
BUS SEP2
When AB bus
system is selected
system is selected
L channel of A bus source
R channel of A bus source L channel of B bus source
R channel of B bus source
When Program/
Preset system is
selected
Preset system is
selected
Preview button lighted: L
channel of PROG source
Preview button flashing: L
channel of PRESET source
channel of PROG source
Preview button flashing: L
channel of PRESET source
Preview button lighted: R
channel of PROG source
Preview button flashing: R
channel of PRESET source
channel of PROG source
Preview button flashing: R
channel of PRESET source
Preview button lighted: L
channel of PRESET source
Preview button flashing: L
channel of PROG source
channel of PRESET source
Preview button flashing: L
channel of PROG source
Preview button lighted: R
channel of PRESET source
Preview button flashing: R
channel of PROG source
channel of PRESET source
Preview button flashing: R
channel of PROG source
12 PAIR
Fixed to sound of
input sources 1 and 2.
input sources 1 and 2.
L and R channel of source 1 L and R channel of source 2 Not available
Not available
12 SEPA.
L channel of source 1
R channel of source 1
L channel of source 2
R channel of source 2