Справочник Пользователя для Optimus SSM-1250
21
REPLACING THE FUSE
The mixer uses a fuse for protection
from power surges and short circuits.
If the mixer suddenly turns off and will
not turn on, check the fuse. If neces-
sary, replace the fuse with a 0.5-amp,
250-volt, fast-acting, 1
from power surges and short circuits.
If the mixer suddenly turns off and will
not turn on, check the fuse. If neces-
sary, replace the fuse with a 0.5-amp,
250-volt, fast-acting, 1
1
/
4
×
1
/
4
inch fuse
such as Cat. No. 270-1003 (not sup-
plied).
plied).
Follow these steps to replace the fuse.
1. Disconnect power from the mixer.
2. Using a Phillips screwdriver, un-
screw the fuse compartment cap
on the back of the mixer.
on the back of the mixer.
3. Remove the old fuse and insert
the new one.
Caution: Make sure you replace
the fuse only with another fuse of
the same type and rating.
the fuse only with another fuse of
the same type and rating.
4. Replace the fuse compartment
cap.
5. Reconnect power.
illustration
32-3009.fm Page 21 Tuesday, August 10, 1999 8:31 AM