Справочник Пользователя для Behringer XL3200

behringer.com

XENYX XL1600/XL2400/XL3200 User Manual

The packaging of your XL1600 contains two 19" rack mounts that can be fastened 

to the side panels of the console.
Before you can attach the rack mounts to the mixing console, you need to remove 

the screws holding the left and right side panels. Then, use these screws to 

fasten the two rack mounts, each specifically to one side. After attaching the 

rack mounts, you can mount the mixing console in a standard 19" rack. Be sure 

to allow for proper air flow around the unit, and do not place the mixing console 

close to radiators or power amps, so as to avoid overheating.

The ¼" inputs and outputs of the BEHRINGER XENYX mixer are unbalanced 

mono TS connectors except for the balanced Line inputs on the mono and stereo 

channels as well as the Main Out connectors. Of course, you can use the mixer 

with balanced as well as unbalanced ¼" connectors. The CD/TAPE inputs and 

outputs are stereo RCA connectors.

Fig. 3.1: XLR connector

Fig. 3.2: ¼" TRS connector

Fig. 3.3: ¼" TS connector

For unbalanced use, pin 1 and pin 3 have to be bridged

1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)

1

2

3

1

2

3

For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.