Справочник Пользователя для Peavey Express 112 S

Congratulations on your purchase of the all new 

 

 

 Series. This amp

represents years of research on vacuum tube emulation, resulting in a totally new Express. The

 has been redesigned, using patent-applied for technology that redefines tubelike distortion

and harmonic generation in solid-state amps.

The new   Dynamics circuitry, also awaiting several patents, creates the long sought for tube power

compression phenomenon. This, when combined with the 

 circuitry, yields the closest tube

amp simulation to date. The compression effect is increased by turning the   Dynamics control
down, which lowers the power level the amp puts out.

To further enhance the performance of the Express, an added external speaker jack is included. The
speaker has been upgraded to a Sheffield, and an effects loop is included to allow for greater flex-
ibility.

-INPUTS 

I

I

I

I

Used for most electric guitars. It is 6 

 louder than Low Gain input.

Provided for instruments that have extremely high outputs, which can result in overdriving (distorting) the High
Gain input. If both inputs are used simultaneously, the output levels are the same (both are Low Gain).

Controls the volume level of the Clean channel.

Provides a preset boost   

 to treble frequencies. To activate, depress the switch to its “in” position.

Allows selection of the Lead or Clean channel. The “in” position of the switch selects the Lead channel and the

“out” position selects Clean.

NOTE: Channel selection may also be achieved by the remote footswitch. If remote selection is desired, the
channel switch must be in the “in” (Lead) position.

Passive tone controls that regulate the low, mid, and high frequencies, respectively.

Controls the input volume level of the Lead channel.

Notches the mid range about