Справочник Пользователя для Peavey 410

FRONT PANEL

3

12 13

 2 4

5

6

9

11

Switch to “on” position to turn on.

Allows amp to be placed in standby or active mode. In standby mode the tubes remain hot, but the amplifier
is not operational.

Allows selection of the Lead or Normal Channel.

 Channel selection may also be accomplished by the remote footswitch. If remote selection is desired

the channel switch must be in the “in” (Lead) position.

Illuminates when AC power is being supplied to the amp.

An active tone control that boosts the extreme high frequencies by   

Controls the overall volume level of the system.

Passive tone controls that regulate high, mid, and low frequencies respectively.

Reverberation is an echo effect. Rotate clockwise to increase the effect. Remote footswitch can control On/Off.

Controls the overall volume level of the Lead channel. The final level adjustment should be made after the
desired sound has been achieved.

Controls the input volume level of the Lead channel.

Controls the volume level of the Normal channel.

Input for instrument-level signals. This input produces enhanced high frequency response (treble), similar
to a bright switch when compared to the normal input.

Input for instrument-level signals. For brighter frequency response (highs) see Bright Input No. 12.

3