Справочник Пользователя для Behringer B512DSP

EUROLIVE B512DSP

4. Application examples

4.1 Presentations

With just one B512DSP and one or two dynamic microphones,

you can set up a basic audio system with very little effort. Thanks

to the built-in mixer section, you can connect the microphones

directly to the B512DSP. Mount the B512DSP on a speaker stand

for optimum presentation and intelligibility of announcements. If

one B512DSP is not enough, you can, of course, use a second

or even more loudspeakers.
Connecting microphones:

Turn the LEVEL controls

fully to the left.

Connect your microphones to the MIC/LINE inputs.

Switch on the B512DSP.

Turn the LEVEL controls

gradually clockwise to set

the volume of your choice. Observe the CLIP LEDs while

adusting the volume. Make sure they never shine constantly

but only light up at peak levels.

Use the LINE OUT connector

to connect an (optional)

second B512DSP.

Never place a microphone directly in front of the

loudspeaker owing to danger of feedback! When

operating the B512DSP make sure that you always

stay behind the loudspeaker to avoid feedback.

Fig. 4.1: Connecting microphones

4.2 PA systems

PA is short for public address and includes all applications that

involve a larger audience. This example uses a mixing console

as its central unit for system operation and connections. All

microphones, feeding and effects devices, etc. are connected

to the mixing console, which is then linked to the B512DSP.
Connecting a mixing console:

Turn the LEVEL controls

fully to the left.

Connect the left output of the mixing console to the MIC/

LINE connector of the left loudspeaker, and the right mixing

console output to the right loudspeaker.

Switch on the B512DSP.

Raise the level of the mixing console output to a level of

0dB.

Turn the LEVEL controls

gradually clockwise to set

the volume of your choice. When the CLIP LEDs light up,

this indicates that the maximum volume has been reached.

Fig. 4.2: Connecting a mixing console

Instead of a mixing console, you can also connect a stereo

signal source, e.g. a CD player. In this case, one B512DSP is

connected to each of the outputs of the signal source.
Connecting a stereo signal source:

Turn the LEVEL controls

fully to the left.

Connect the left output of the stereo device to the MIC/LINE

connector of the left loudspeaker, and the right stereo

device output to the MIC/LINE connector of the right

loudspeaker.

Switch on the B512DSP.

Raise the output level of the stereo signal source (if

available), ensuring that it does not overload the input.

Turn the LEVEL controls

gradually clockwise to set

the volume of your choice.