Справочник Пользователя для Alesis DM10

 

 
Pressing TRIG (F3) from the Main Utility menu lets you access a page that contains the various trigger 
settings for the module. 
 
TRIG 
1.

 

Press UTILITY to enter the main Utility Menu. 

2.

 

Press TRIG (F3) to access the trigger settings.   

3.

 

Use VALUE UP / DOWN or the VALUE DIAL to adjust the 
settings: 
a.

 

Trig Sens:  The sensitivity of all the connected triggers – "LOW," "MEDIUM," or "HIGH."  
Adjusting this setting lets you roughly set the sensitivity of the entire Kit but conveniently keeps 
the proportions of your individual trigger settings.  (To adjust the sensitivity of individual triggers, 
see the TRIGGER INPUT PARAMETERS section of the EXT. TRIG MENU chapter.) 

b.

 

HiHat * : Select "NOTE+CC#4" or "NOTE ONLY."  This determines whether the hi-hat MIDI note 
will be sent with or without CC information (CC#4). 

c.

 

HH Splash * : Select "SENT" or "NOT SENT."  This determines whether the hi-hat "splash" note 
(generated by quickly pressing then releasing the pedal) will be sent or not. 

d.

 

Cym Choke * : Select "SENT" or "NOT SENT."  This determines whether the cymbal "choke" 
note (generated by grabbing the cymbal and touching the choke strip) will be sent or not.  

 

 

 

 
Pressing SYS (F4) from the Main Utility menu lets you access a page that contains the module's various 
system settings. 

 

SYSX (F1) 
This page lets you send out the module's settings as a SysEx (.syx) file 
to be recalled later. 
1.

 

Press UTILITY to enter the main Utility Menu.1). 

2.

 

Use CURSOR UP / DOWN to move through the menu items: 
a.

 

All Memory: All of the module's memory that can be saved 
will be saved as a SysEx file.  This includesyour trigger 
settings, Kits, and Sequences. 

b.

 

All Trigger Settings: Only the module's trigger settings will be saved as a SysEx file. 

3.

 

Press SEND (F4) to send the selected settings from the module as a SysEx file. 

 

INIT (F2) 
This page lets you reinitialize different settings in the module, restoring 
them to their factory defaults. 
1.

 

Press UTILITY to enter the main Utility Menu. 

2.

 

Press SYS (F4) to access the Accompaniment settings.   

3.

 

Press INIT (F2) to access the reinitialization page. 

4.

 

Use CURSOR UP / DOWN to move through the menu items: 
a.

 

All Kits: All of the module's Kits and their settings will 
return to their factory defaults. 

b.

 

All Sequences: All of the module's Sequences and their 
settings will return to their factory defaults. 

c.

 

All Trigger Settings: All of the module's trigger settings 
will return to their factory defaults. 

5.

 

Press EXEC (F4). 

6.

 

A window will appear asking you to confirm your choice.  To confirm and reinitialize the selected 
settings, press YES (F1).  To cancel, press CANCEL (F2 or F3).