Справочник Пользователя для Carrier 500 T/R

                                                                   Page  12                                     

62-61138-20   (02/03) 

 
 
 
 
 

DataCold 500 T/R have four different user menu’s, which are directly accessible via the keyboard: 
 
1. Print 

menu 

2. Alarm 

menu 

3.  User settings menu 
4. Status 

menu 

 
Press Blue button. The last selected print choice will be displayed. Printing 
starts after 2 seconds. Repeatedly pressing the Blue button will scroll 
between the available printouts, delivery ticket, graphical- and numerical 
ticket. 

Print delivery ticket 

 
By pressing the Blue button for more than 2 seconds the following menu’s will be entered: 
 
3.1.1  Select compartment to print. 
 
After pressing [edit] you can toggle with [

↑], [↓] between the available 

compartments and select with the green button [accept] the required one. 
 

1.1 Select compartment 
to print  
COMP.1 

↑     ↓     edit     <-menu

 

 
3.1.2  Print event report 
 
By pressing the Green button [accept] printing of the event report will start. 
 
 

1.2 Print event  
report 
 

↑     ↓    accept    <-menu

 

 
3.1.3  Print parameter report 
 
By pressing the Green button [accept] the parameter report will be printed 
after entering the correct PIN code. 
 

1.3 Print parameter 
report 

↑     ↓    accept    <-menu

 

 
3.1.4  Set print date 
 
With [edit] you can select a historical date for printing. After confirmation of 
the date with[accept] you can select the required report with the Blue 
button. Printing starts with a delay of 2 seconds. 

1.4 Set print date  

(01-01-2000) 

↑     ↓     edit     <-menu

 

 
 
The next options from menu 1.5 until 1.8 can be switched on or off for the user by the supervisor. 
3.1.5  Delivery ticket setting 
 
With [edit] you can set the desired information printed on the delivery ticket. 
You can select ‚actual value‘, ‚actual + average‘ or ‚actual, average and 
min-max values. 

1.5 Delivery ticket 
setting actual value 
 

↑     ↓     edit     <-menu

 

 

3.1.6  Print time period 
 
This option is used in combination with ‘Day start- and end time’ in order to 
determine the time period of the various print reports. A print out starts from 
the actual time and prints back for the number of hours set in this 
parameter, but not further as the ‘Day start time’ set in the next menu.  If the 

1.6 Print time period  

(10 hour) 

 

↑     ↓     edit     <-menu