Справочник Пользователя для SonicWALL UTM Appliance

14 

This is the other method of authenticating users, and requires the user to login to the appliance.  Please refer 
to the following paper for more details on ULA: 

http://www.sonicwall.com/downloads/SonicOS_Standard_2.1_User-Level_Authentication.pdf

 

 
In this example, the LAN zone will be configured for ULA:  

Step 1: Go to Network>Interfaces>X0 (or appropriate interface). 

Step 2: Under General enable HTTPS User Login. Also enable Add rule to enable redirect from 

HTTP to HTTPS if neither HTTP Management nor HTTP Login are enabled (it is not needed if either 

of them are). 

Step 3: Go to Firewall>Access Rules>LAN>WAN. The default is set to: ‘Any, Any, Any, Allow’ rule, 

shown below.