Справочник Пользователя для Ryobi DP121L

11

See Figure 2.
Before attempting to use this product, familiarize yourself 
with all operating features and safety rules.

The bevel scale indicates the degree the table is tilted.

Your drill press features a standard three-jaw type chuck with 
a self-ejecting chuck key, which prevents accidentally starting 
the drill press with the key still engaged in the chuck.

A depth gauge is located between the pulley housing and 
feed handles to aid in drilling at desired depths.

The adjustable locking depth stop permits accurate depth 
measurement and repetitive drilling.

Red  numbers  in  the  digital  display  show  the  RPM  of  the 
tool. 

The  chuck  tool  is  used  to  remove  the  chuck  and  chuck 
spindle.

The  Exactline

™

  laser  makes  accurate,  precision  drilling 

simple and easy.

Feed handles raise and lower the chuck and bit during the 
drilling operation.

Your drill press is equipped with an industrial duty induction 
motor for long-lasting, smooth performance.

The  spindle  lock  lever  secures  the  spindle  at  the  desired 
depth for drilling. 

Five different spindle speeds allow you to drill a wide variety 
of material including wood, plastic, and metal.

The table of your drill press rotates 360˚ and bevels up to 
45˚ for angle drilling.

Adjust drilling speed using the variable speed lever on the 
side of the tool. Speed can only be changed when the tool 
is on. 

Use  the  vise  to  secure  the  workpiece  to  the  table  when 
drilling.

The integrated worklight can be used to help illuminate the 
work area. It requires a 15-watt, 10-volt, candelabra-base 
bulb (not included).

Fig. 3

The following tools (not included) are needed for assembly and alignment: