Справочник Пользователя для Mitsubishi Electronics QCPU
7-137
COM
1
2
3
4
6
6
7
8
7
.6 Structure cre
ation instructions
7
.6.10 Select R
efresh Instruction (COM)
7.6.10
Select Refresh Instruction (COM)
COM
Refer to Section 7.6.9. for the COM instruction of the following CPU modules.
• Basic model QCPU of serial No. 04121 or lower
• High Performance model QCPU of serial No. 04011 or lower
• Process CPU of serial No. 07031 or lower
• Basic model QCPU of serial No. 04121 or lower
• High Performance model QCPU of serial No. 04011 or lower
• Process CPU of serial No. 07031 or lower
Function
(1) When the COM instruction is executed, the following refresh operations can be performed.
• I/O refresh
• CC-Link refresh
• CC-Link IE controller network refresh
• MELSECNET/H refresh
• Auto refresh of intelligent function modules
• Auto refresh using QCPU standard area of multiple CPU system
• Reading input/output data of all modules other than the multiple CPU system group
• Auto refresh using the multiple CPU high speed transmission area of multiple CPU
system
• Communication with peripheral device
Remark
The following processing is performed in communication with peripheral device.
• Monitor processing of other station
• Read of another intelligent function module buffer memory by the serial
• Read of another intelligent function module buffer memory by the serial
communication module
(2) Turning OFF SM775 refreshes all refresh items except I/O refresh.
The first 5 digits of the serial No. are "04122" or higher.
The first 5 digits of the serial No. are "04012" or higher.
The first 5 digits of the serial No. are "07032" or higher.
The first 5 digits of the serial No. are "04012" or higher.
The first 5 digits of the serial No. are "07032" or higher.
Setting
Data
Internal Devices
Z, ZR
J
\
U
\G
Zn
Constants
Other
Bit
Word
Bit
Word
––
––
Redundant Universal
Ver.
Basic
Ver.
Process
Ver.
High
performance
COM
COM