Справочник Пользователя для Mitsubishi Electronics QCPU

7-352

SECOND(P)

7.15.5

Time data conversion (from Hour/Minute/Second to Second)

(SECOND(P))

SECOND(P)

Function

(1) Converts the time data stored in the area starting from the device designated by

seconds and stores the conversion result into the device designated by

For example, if the value were 4 hours, 29 minutes, and 31 seconds, the conversion would
be made as follows:

Operation Error

(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and

an error code is stored into SD0.

• The data set by

and is outside the setting range.

(Error code: 4100)

• The device specified by

exceeds the range of the corresponding device.

(For the Universal model QCPU only.)

(Error code: 4101)

: Head number of the devices where the clock data before conversion is stored (BIN 16 bits)

: Head number of the devices where the clock data after conversion will be stored (BIN 32 bits)

Setting

Data

Internal Devices

R, ZR

Constants

Other

Bit

Word

Bit

Word

––

Basic

Process

High

performance

Redundant Universal

Command

SECONDP

SECOND

Hour

Minute

Second

(0 to 23)

(0 to 59)

Second

Data range

16171