Справочник Пользователя для Grizzly G0758
Model G0758 (Mfd. Since 2/14)
-23-
Headstock
Movement
Raising/Lowering Headstock
1. DISCONNECT MACHINE FROM POWER!
2. Loosen both Z-axis lock levers shown in
Figure 20.
Figure 20. Location of Z-axis lock levers.
Z-Axis
Lock
Levers
3. Use vertical handwheel shown in Figure 21
to adjust headstock height.
4. Retighten lock levers.
Figure 21. Location of Z-axis handwheel.
Vertical
Handwheel
The headstock moves in the following ways:
•
Travels up and down the column (Z-axis).
•
Tilts 45° left or right relative to the table.
Tilting Headstock
Tools Needed
Qty
Wrench 19mm ................................................... 1
Wrench 14mm ................................................... 1
Wrench 14mm ................................................... 1
To tilt headstock:
1. DISCONNECT MACHINE FROM POWER!
2. Support headstock with one hand, then loos-
en headstock center bolt and angle lock nut
(see
(see
Figure 22).
3. While watching tilt scale, rotate headstock to
required angle, then retighten center bolt and
angle lock nut to secure headstock.
angle lock nut to secure headstock.
Tilt Scale
Center Bolt
Figure 22. Headstock tilt controls.
Angle
Lock Nut