Справочник Пользователя для Grizzly G0619

G0619 DELUXE SMALL MILL/DRILL

-15-

Damage to your eyes, lungs, and ears could

result from using this machine without

proper protective gear. Always wear safety

glasses, a respirator, and hearing protection

when operating this machine.

Loose hair and cloth-

ing could get caught in

machinery and cause seri-

ous personal injury. Keep

loose clothing and long

hair away from moving

machinery.

Operation Safety

SECTION 4: OPERATIONS

NOTICE

If you have never used this type of machine

or equipment before, WE STRONGLY REC-

OMMEND that you read books, trade maga-

zines, or get formal training before begin-

ning any projects. Regardless of the con-

tent in this section, Grizzly Industrial will

not be held liable for accidents caused by

lack of training.

Figure 10. Spindle controls.

Spindle Height

Control

Quill Lock Lever

Spindle height is changed by unlocking the quill
lock and using the down feed handles or the fine
feed knob (

Figure 10). The digital spindle height

readout indicates the spindle height.

To change the spindle position:

1. Unlock the quill lock lever and loosen the fine

feed lock knob.

Tip: Use the comfort lever (Figure 10) for

additional leverage to unlock the fine feed
lock knob if the knob is too tight. Do not use
the comfort lever to tighten the knob.

2. Pull down on the quill feed levers to lower

or raise the spindle. Lock the quill lock to
hold the spindle in a particular position if you
choose.

Tip: Milling with the quill fully extended,

can cause tool chatter. For maximum spindle
rigidity when milling, it is better to keep the
spindle retracted into the headstock as far as
possible with the quill lock lever locked, and
the fine feed lock knob tightened.

Comfort Lever

Quill Feed Lever

Fine Feed Lock Knob

Spindle