Справочник Пользователя для Invacare Compressor

SECTION 2—INITIAL SETUP

4. Plug the opposite end of the power cord into the wall

outlet.

Connecting the Compressor to the Concentrator

NOTE: For this procedure, refer to FIGURE 2.3 on page 15.
1. Insert one end of the interconnect hose into the outlet

fitting on the back of the concentrator (Detail “A”).

2. Insert the opposite end of the interconnect hose into the

inlet fitting on the side of the compressor (Detail “B”).

NOTE: The metal tabs on the concentrator outlet fitting and the

compressor inlet fitting will pop out with an audible “click” when

the end of the interconnect hose is properly installed (Detail “C”).
3. Loop any excess interconnect hose and secure to the back

of the concentrator with the fastening straps.

Wall

Outlet

Power

Cord

Compressor

(REAR)

Electrical

Connection

NOTE: This product has a polarized plug (one blade is wider than

the other). As a safety feature, this plug will fit in a polarized outlet

only one way. If the plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician. DO NOT

attempt to defeat this safety feature.