Справочник Пользователя для Grizzly G9860
-16-
Extreme series Jointer (Mfg. since 9/11)
Moving &
assembling Jointer
your Extreme Series
Jointer is a heavy
machine. Serious per-
sonal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power equipment rated
for at least 1500 lbs. to
move the shipping crate
and remove the machine
from the crate.
Moving & placing Jointer
1. review the power Supply section beginning
on
page 9 and Mounting to Shop Floor on
page 15, then prepare the permanent loca-
tion for your jointer.
tion for your jointer.
2. remove the top and sides of the shipping
crate, then place the small items aside in a
safe location.
safe location.
3. remove the four pre-installed cap screws
from the back of the jointer, then, with assis-
tance, secure the pedestal to the jointer with
these cap screws, as shown in
tance, secure the pedestal to the jointer with
these cap screws, as shown in
Figure 15.
Figure 14. Machine mount example.
using Machine Mounts
using machine mounts, shown in
Figure 14, gives
the advantage of fast leveling and vibration reduc-
tion. the large size of the foot pads distributes
the weight of the machine to reduce strain on the
floor.
tion. the large size of the foot pads distributes
the weight of the machine to reduce strain on the
floor.
NOTICE
We strongly recommend securing your
machine to the floor if it is hardwired to the
power source. consult with your electrician
to ensure compliance with local codes.
Figure 15. installing control panel pedestal.
x 4