Справочник Пользователя для Mitsubishi Electronics MDS-R

 
 
 

 

 

A1 - 19

 

[1]  Temporarily tighten the clamp nut on the back shell. 

* To prevent loosening, the adhesive should be applied to the back shell. 

[2]  Set the clamp nut wrench on the clamp nut. 
[3]  With the wrench, tighten the clamp nut on the straight back shell. 

Recommended tightening: 5N

m 

(Note) Accurately fit the wrench on the clamp nut. 

To remove, take the reverse steps. 

 

 

 

* Recommendation 

Adhesive (2 threads around   
the circumference) 

Temporary tightening

Set 

Tightening guide 

Torque wrench

Tighten 

Clamp nut 
 wrench 

19 

17

* Referential dimensions for back 

shell tightening guide 

(Back shell width) 

20 

Thickness 

:10 

* Recommendation : 

Tightening guide 
(357J-50494T) 

●  Recommended jigs and tools : Clamp nut wrench(357J-51334T) 

Bit (357J-51345T) 

Torque wrench (CL6N x 8D, Tonichi Mfg.) 

* Recommended tightening jig : (357J-50494T)

Back shell 

Clamp nut

Tightening guide 

 

* Recommended adhesive : Screw lock 1401B (Three Bond Co,.Ltd)