Справочник Пользователя для Lincoln Electric SVM160-B

If for any reason you do not understand the test procedures or are unable to perform the test/repairs safely, 
contact the Lincoln Electric Service Department for electrical troubleshooting assistance before you proceed.  Call
1-800-833-9353.

The contact tip seizes in the gas dif-
fuser.

1. The tip being over heated due to

excessive current and/or high
duty cycle welding.

2. A light application of high temper-

ature anti-seize lubricant (such as
Lincoln E2607 Graphite Grease)
may be applied to the contact tip
threads.

1.  Check  the 

The welding arc is variable and
sluggish.

1. Check the welding cable connec-

tions for loose or faulty connec-
tions.

2. Make sure the wire feed speed,

voltage, and shielding gas are
correct for the process being
used.

1. Check the OCV and 

If wave-

forms are not correct Perform the

2. Reload latest software from a

Lincoln Electric sales representa-
tive

3. The Control Board may be faulty.

Replace.

The arc striking is poor.

1. Check the welding cable connec-

tions for loose or faulty connec-
tions.

2. Make sure the wire feed speed,

voltage, and shielding gas are
correct for the process being
used.

3. Run in settings may need to be

adjusted.

1. Check the 

2. Reload latest software from a

Lincoln Electric sales representa-
tive

3. The Control board may be faulty.

Replace.