Справочник Пользователя для Netopia ISDN Router

2.

Select Switch Type and press Return. From the pop-up menu, select the switch protocol your ISDN ser vice 
provider uses. 

For European countries other than the United Kingdom, use the EuroISDN/ETSI setting. United Kingdom 
users select United Kingdom - EuroISDN.

3.

Select Directory Number 1.

The router attempted to detect your Director y Number(s) when you selected Auto-Detect in Step 1.

If it succeeded, the director y number(s) will be displayed, and the screen will indicate “Detected” (as 
shown on 

).

If it failed to detect your director y numbers, the fields will remain blank, and you must enter the primar y 
director y number as you would dial it, including area code. Do not enter access prefixes such as Centrex or 
PBX prefixes like “9” (for an outside line). Press Return.

4.

If you have a second director y number, select Directory Number 2 and enter the secondar y director y 
number as you would dial it, including area code. Press Return.

5.

If you require a dialing prefix such as “9” to access an outside line on a PBX or Centrex phone system, 
select PBX Prefix and enter your dialing prefix. Press Return.

6.

Select Data Link Encapsulation and highlight the method of encapsulation that you want to use from the 
pop-up menu. The choices offered are PPP or HDLC. The default for switched inter faces is PPP. Press 
Return.

7.

Select NEXT SCREEN and press Return. The 

) appears.

Any changes you make to the ISDN configuration now or in the future will take effect immediately. You do not 
have to restar t the router.