Справочник Пользователя для Honeywell 62-0342-01

62-0342-01

The SUB Series Interval Data Recorder (IDR) is an energy 

data collection device. Installation must be performed by 

qualified personnel only and must be in accordance with local 

and national electrical codes. Honeywell and its 

representatives are not responsible for damage or injury from 

improper installation.

The IDR is contained within a NEMA 12 enclosure and is 

designed for INDOOR USE ONLY, where ambient 

temperatures are between +32 and +120 ºF. It is available in 8 

and 16 input configurations.

The SUBIDR must be located in an area that is central to the 

meters connected to it.

NOTE: The IDR with modular jacks is designed to operate 

with Honeywell meters only. Terminal input models 

can support the monitoring of third-party metering 

equipment; contact Honeywell for further information.

The IDR must be installed in a location according to these 

guidelines to ensure continued safe, trouble-free operation.

— Do not install near sensitive radio communication 

equipment or receiving antenna systems.

— Do not install near high-energy electrical fields such as 

those produced by welding equipment or by high-

power electrical motors.

— Always install in an area that is dry, away from any 

potential liquid or chemical splash hazards. Never 

install electrical equipment in an area where flamma-

ble chemicals or vapors are present.

— The IDR enclosure’s door must be kept closed once 

installed. Exposing the internal circuits to dust, dirt, 

fumes or high humidity can damage the IDR.

NOTE: All internal circuits are isolated from the AC line.

NOTE: IDRs with modular jacks can be powered from either 

the first Honeywell meter or by an external power 

supply (requires 120 VAC). IDRs with removable 

screw-type connectors require an external power 

supply (provided).

SUBIDR-16’s are supplied with an ID letter for each group of 8 

inputs to make them compatible with E-Mon Energy™ 

software. The available choices are A-B, C-D, E-F, G-H, I-J, K-

L, M-N, O-P, Q-R, S-T, U-V, W-X and Y-Z. No other combi-

nations are available. When mixing 8-point and 16-point IDRs 

together, it may be necessary to jump a letter in the system. 

As an example, if you have an 8-point IDR labeled “A”, “B” and 

“C”, the 16-point IDR to choose would be the E-F unit.

The IDR is available in three configurations.

1. Modular Jacks (SUBIDR-8 and SUBIDR-16): Supplied 

with all modular jacks for use only with Honeywell 

meters.

2. Plug-In Screw-Type Connectors (SUBIDR-8 and 

SUBIDR-16): Supplied with all plug-in screw-type con-

nectors for use with third-party meters (electric, gas, 

water, etc.) that are provided with a dry contact pulse 

output. (Requires external power supply.)