Справочник Пользователя для IBM TDS400
188
Océ TDS400 User Manual
[109] Opening the plate
3
Remove any jammed printing material.
4
Squeeze the two knobs again and put the plate in its original position.
5
Release the green lever in the lower section of the belt unit (by slightly lifting
it and pulling it forward) to open the lower plate (see Figure 110).
it and pulling it forward) to open the lower plate (see Figure 110).
[110] Opening the lower plate
6
Remove any jammed printing material.
7
Pull up the green lever again (until it locks into position) to close the plate.
8
Close the belt unit door.
9
Put the belt in its operating position by pushing it down gently.