Справочник Пользователя для IBM TDS400
Using the Océ TDS400 to Copy
65
▼
Select standard cut
1
Press the Extra key.
2
Select ‘Paper copy’ with the
or
key.
3
Press
key, to enter the ‘Paper copy’ menu.
4
Select ‘cut length’ with the
or
key.
5
Press
key, to enter the ‘cut length’ menu.
6
Select a standard paper format with the
or
key.
7
Press the ‘confirm’ key.
Adjust the leading or the trailing strip
To increase the copy length to accommodate for a filing strip select a positive
leading or trailing strip.
leading or trailing strip.
If you do not want the filing strip to show on the copy, select a negative leading
or trailing strip. The adjustment steps are indicated on the operator panel,
expressed in millimetres or 0.1 inches.
or trailing strip. The adjustment steps are indicated on the operator panel,
expressed in millimetres or 0.1 inches.
▼
Adjust the leading or the trailing strip
1
Press the ‘strip’ key to toggle between ‘leading’ and ‘trailing’ strip.
2
Select a positive or negative value in steps of 10 mm with the
or
key.
3
Select a positive or negative value in steps of 1 mm with the
or
key.
The length of the selected strip is shown in the display. If the adjustment differs
from the default setting, the indication lights.
from the default setting, the indication lights.
Attention:
If you make the strip larger than the strip on the original, you can
lose information.