Справочник Пользователя для IBM TDS400
78
Océ TDS400 User Manual
Destinaspbtion
You can store your scan either in the temporary store on the controller or on a
network destination. You can define up to six destinations in the Océ Scan
Manager application. On the scanner operator panel you can choose one of
these destinations.
network destination. You can define up to six destinations in the Océ Scan
Manager application. On the scanner operator panel you can choose one of
these destinations.
▼
Select a destination
1
Press the Extra key.
2
Select ‘Destination’ with he
or
key.
3
Press the
key, to enter the ‘Destination’ menu.
4
Select the needed ‘Destination’ with he
or
key.
5
Press the Confirm key.
Note:
The names of the destinations can be any. However, for your
convenience, you are able to define understandable nicknames in the Océ Scan
Manager application (see ‘Create a local destination’ on page 86).
Manager application (see ‘Create a local destination’ on page 86).
Checkprint
A Checkprint is a print from the scanned original. You can turn Checkprint on
or off.
or off.
▼
Select Checkprint
1
Press the Output key to select ‘file’.
2
Press the Extra key.
3
Select ‘Checkprint’ with he
or
key.
4
Press the
key, to enter the ‘Checkprint’ menu.
5
Select ‘on’ or ‘off’ with the
or
key.
6
Press the Confirm key.
Resolution
The Océ TDS400 Scan Logic® option can scan three resolutions:
■
200 dots per inch (dpi)
■
300 dpi
■
400 dpi
To reach the best print quality on the Océ TDS400 select 300 dpi.