Справочник Пользователя для Konica Minolta A0HF012
Replacing Consumables
7-10
Replacing All Toner Cartridges at the Same Time
Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
spills, immediately wipe it off with a soft, dry cloth.
By selecting the
EJECT MODE
in the
PRINTER MODE menu, all toner car-
tridges can be replaced at the same time.
Follow the procedure described below to use the EJECT MODE.
Follow the procedure described below to use the EJECT MODE.
1
With the main screen displayed, press the * key to display the PRINTER
MODE screen.
MODE screen.
2
Press the , key to select
T/C CHANGE
and then press the Select key.
3
Press the , key to select
EJECT MODE
and then press the Select key.
4
Perform the operations described in steps 6 through 15 of “Replacing a
Toner Cartridge” on page 7-5 through 7-9 to replace the magenta toner
cartridge.
Toner Cartridge” on page 7-5 through 7-9 to replace the magenta toner
cartridge.
"
To exit EJECT MODE, press the Stop/Reset key.
5
Follow the same procedure to replace the cartridges for the cyan, black,
then yellow toners.
then yellow toners.
6
Press the Stop/Reset key to reset the machine.
"
The machine must complete a calibration cycle (less than 2 min-
utes) after a toner cartridge has been replaced. If you open the
scanner unit or front cover before the machine is reset, the calibra-
tion stops, then starts over again after the cover is closed.
utes) after a toner cartridge has been replaced. If you open the
scanner unit or front cover before the machine is reset, the calibra-
tion stops, then starts over again after the cover is closed.