Справочник Пользователя для KYOCERA copier

The Off mode automatically turns most of the power to the copier 
off if no operation has been performed on the copier for a pre-set 
period of time (between 15 and 240 minutes). “-” will be shown on 
the copy quantity/magnification display, but everything else on the 
operation panel will go out.
The factory default setting is for 30 minutes.

It is possible to engage the Off mode manually.
Press down on the Reset/Power key for at least 3 seconds.
The Off mode will engage immediately.

When the Off mode is engaged, all power to the copier, 
except that to the operation panel, is turned off. When 
the power switch is turned OFF ({), all power to the 
copier, including to the operation panel, is turned off.

To enable copying again, press any one of the keys on the operation 
panel.

The Off mode is a power-saving feature which automatically turns 
most of the power to the copier off when a certain time elapses 
without any operation being performed. 
Copiers are generally in a standby mode more than they are in 
actual operation, so power consumption during this standby period 
occupies a large part of overall consumption. Having the copier 
enter the Off mode automatically after a certain amount of time 
reduces unnecessary power consumption during the standby period 
or at night if the copier happens to be left on accidentally. The 
result is a lower electricity bill.

• It is possible to set the amount of time before the Off 

mode engages. (See “Off Mode Time” on page 6-4.)

• It is also possible to disable the Off mode. (See “Off 

Mode ON/OFF” on page 6-4.)