Справочник Пользователя для Ricoh LD260

System Settings

42

❖ Key Repeat

You can enable or disable repetition of an operation if a key on the screen or
control panel is pressed continuously.
The default setting is Normal.

❖ Z-fold Position

If you specify Z-folding, set the fold-back position in 1 mm (0.1") increments.
The setting ranges of the folding position for each paper size are shown be-
low:
• Metric  version:

• A3: 2 - 25 mm
• B4 JIS: 2 - 40 mm
• A4: 2 - 10 mm
• 11 × 17: 2 - 20 mm
• 8

1

/

2

 × 14: 2-35 mm

• Inch version:

• A3: 0.1" - 1.0"
• B4 JIS: 0.1" - 1.6"
• A4: 0.1" - 0.4"
• 11 × 17: 0.1" - 0.8"
• 8

1

/

2

 × 14: 0.1" - 1.4"

The default setting is 2 mm (Metric version) / 0.1" (Inch version). 

❒ If the Panel Key Sound setting is [Off], the beeper does not sound, whatever

the Warm-up Beeper setting.

❒ The Function Reset Timer setting is ignored if Interleave is set for Print Prior-

ity.

p.3 “Accessing User Tools”
“Function Compatibility”, Copy/Document Server Reference

❒ You cannot interrupt the current stapling job even if a stapling job is specified

by a different function.

❒ If Staple or Shift Sort is selected on a machine equipped with Booklet Finisher,

3,000Sheet-100Sheet Staple Finisher, or 3,000Sheet-50Sheet Staple Finisher,
copies are output to “Finisher Upper Tray”, “Finisher Shift Tray”, or “Finish-
er Booklet Tray”, regardless of the current output destination setting.