Справочник Пользователя для Mitsubishi Electronics SDP-ECO 1630 III

•

Press this key to turn OFF the power supply to the machine and shut it
down (after cleaning the processor roller).  To re-start the machine, press
the Power ON/OFF key again.
This key only works in the first local status display and does not work at
all in the remote status.

[Final inspection display]

Final inspection
Always press the Power ON/OFF key when the operation ends.

•

The following display appears on the panel while the remote mode is selected.

START  OK

The ON LINE lamp is lit while this is displayed.
Pressing the 

key shows the current state of the plate.

Pressing the 

key shows the number of images in data remaining on the

hard disk drive.

•

Use the 

key, 

keys, and 

key to select menus or

commands.  The 

key brings up the menu level in the remote and local

modes.  The 

keys switch the menu level between remote and local.

The 

keys are used to shift between commands.  Selectable

commands appear with one of their letters underlined.  You can select
commands on the right by pressing the right key and commands on the left
with the left key.
Pressing the 

key when a ">" mark is shown at the right edge of the menu

display shows the next (hidden) menu to the right.  (Simply reverse this step
to move to hidden menus on the left.)  When you find the desired menu, press
the 

key. Proceed to the next menu.

ENT.

MENU

ENT.

MENU

Chapter 5  Menus and panel displays

- 39 -

Waste Tank?

Nip Free

Cleaning

Power OFF

HDD         1/2

Amount of image data which has not yet been exposed. 

Amount of image data in the hard disk drive.

Caution