Справочник Пользователя для Mitsubishi Electronics SDP-ECO 1630 III

Chapter 7  Maintenance

- 59 -

14) Attach the bearing for a roller to

the lower exit roller.

15) Install the lower exit roller by

slightly rotating it in such a
manner that the pin in the
coupling properly engages the
groove in the lower exit roller.

If the groove in the lower exit

roller properly engages the

pin in the coupling, the lower

exit roller rotates only

counterclockwise.

16) Install the other necessary parts

reversing the order of steps you
followed when you removed
them.

Clean the washing tank every one month to prevent contamination with
slime or mold.

You must thoroughly read "1.3 Handling processing chemicals".

1) Turn OFF the main power switch.
2) Lay out the maintenance mat.
3) Open the front door and remove

the replenisher bottle.

4) Insert the SLM-EST drain port in

the processing chemical collec-
tion  hole (located in the upper
cover of the tank).

Note

Pin

Bearing for a
roller

Exit roller (lower)

Groove

Processing
chemical
collection hole

Drain port for SLM-EST