Справочник Пользователя для Ricoh MP C1500
Connecting the Machine
10
1
Note
❒ This machine does not come with a USB interface cable. Make sure you
purchase the appropriate cable for the machine and your computer.
❒ The USB 2.0 interface board is supported by WindowsMe / 2000 / XP,
Windows Server 2003, Mac OS X10.3.3 or higher.
• For WindowsMe:
• For WindowsMe:
Make sure to install “USB Printing Support”. When used with Win-
dowsMe, only a speed equal to that of USB 1.1 is possible.
dowsMe, only a speed equal to that of USB 1.1 is possible.
• For Mac OS:
To use Macintosh, the machine must be equipped with the optional
PostScript 3 unit. When used with Mac OS X10.3.3 or higher, a transfer
speed of USB 2.0 is supported.
PostScript 3 unit. When used with Mac OS X10.3.3 or higher, a transfer
speed of USB 2.0 is supported.
❒ For details about installing the printer driver, see “Preparing the Ma-
chine”, Printer Reference.
Reference
“Preparing the Machine”, Printer Reference
Connecting to the IEEE 1394 Interface (SCSI print/IPv4 over 1394)
Connect the IEEE 1394 interface cable to the IEEE 1394 interface board.
A
Connect the IEEE 1394 interface cable to the IEEE 1394 port.
B
Connect the other end of the cable into the interface connector on the host
computer.
Check the shape of the connector to the computer. Connect the cable firmly.
computer.
Check the shape of the connector to the computer. Connect the cable firmly.
Note
❒ Use the interface cable supplied with the optional IEEE 1394 interface board.
❒ Two interface ports are available for connecting the IEEE 1394 interface ca-
❒ Two interface ports are available for connecting the IEEE 1394 interface ca-
ble. Either is suitable.
❒ If you have an interface that has with a ferrite core, connect the end that is
nearest the ferrite core to the machine.
❒ For details about installing the printer driver, see “Preparing the Ma-
chine”, Printer Reference.
AMB006S