Справочник Пользователя для Ricoh MP C1500

Connecting the Machine

26

❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-

.

❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If

both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.

❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]

and [POP3/IMAP4 Settings].

❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail

.

p.54 “Interface Settings”
p.63 “File Transfer”

This section lists the settings required for sending file.

This section lists the settings required for sending file with ethernet cable.
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.

File Transfer Setting

Reception Protocol

As required

File Transfer Setting

POP3/IMAP4 Settings

As required

File Transfer Setting

Key Operator's E-mail Add.

As required

File Transfer Setting

E-mail Communication Port

As required

File Transfer Setting

Scanner Resend Time

As required

File Transfer Setting

Scanner Resend Setting

As required

Interface Setting/Network Machine IPv4 Address

Necessary

Interface Setting/Network IPv4 Gateway Address

Necessary

Interface Setting/Network DNS Configuration

As required

Interface Setting/Network DDNS Configuration

As required

Interface Setting/Network Domain

As required

Interface Setting/Network WINS Configuration

As required

Interface Setting/Network Effective Protocol

Necessary

Interface Setting/Network LAN Type

Necessary