Справочник Пользователя для Ricoh SP C252SF

DAC515

• When you specify a scan destination, the machine's scan settings change automatically according

to the information registered for that destination in the Address Book. If necessary, you can change
the scan settings using the control panel. For scan settings, see page 136 "Specifying the Scan
Settings".

• The [Pause/Redial] key is not effective for the first scan job after the machine is turned on.
• To select destinations not registered as Quick Dial entries, use the [Address Book] key. For

• You can press the [Clear/Stop] key to clear the destination.

Basic Operation for Scan to USB

This section describes the basic operation for sending scanned files to a USB flash disk.

• The original in the ADF takes precedence over the original on the exposure glass if you place

originals both in the ADF and on the exposure glass.

• This machine does not support the use of USB flash disks connected to external USB hubs. Insert

your USB flash disk directly into the USB flash disk port located at the top left corner of the
machine.

• Certain types of USB flash disks cannot be used.
• Select to enable the Scan to USB feature, specify [Active] for the [Save Scn Data to USB] setting

5. Scanning Originals

132