Справочник Пользователя для Ricoh SP C252SF

Scanner Problems

When You Cannot Browse the Network to Send a Scan File

Problem

Solution

The following machine settings may
not be correct:

• IP address
• Subnet Mask

When Scanning Is Not Done As Expected

Problem

Solution

The machine does not start scanning. The ADF or its cover is open. Close the ADF or its cover.

The scanned image is dirty.

• The exposure glass or ADF is dirty. See page 273

• Before placing originals on the exposure glass, make

sure that toner or correction fluid is dry.

The scanned image is distorted or
out of position.

The original was moved during scanning. Do not move the
original during scanning.

The scanned image is upside down.

The original was placed upside down. Place the original in the
correct orientation. See page 82 "Placing Originals".

The scanned image is blank.

The original was placed with the front and back reversed.
When using the exposure glass, place originals copy side
down. When using the ADF, place originals copy side up. See
page 82 "Placing Originals".

The scanned image is too dark or
too light.

The Scan to E-mail, Scan to FTP, or
Scan to Folder function does not
work.

Check if a USB flash disk is inserted into the machine. If a USB
flash disk is inserted, scanning functions other than Scan to
USB are not available from the control panel.

Scanner Problems

323