Справочник Пользователя для Ricoh LF 125 (H915)
M
AINTENANCE
7.3
7
Adjusting Shading
When the scan unit becomes dirty, it can alter the shading value.
If your copy has black lines or is blurred, adjust the shading
setting.
If your copy has black lines or is blurred, adjust the shading
setting.
1
Load a sheet of white paper into the ADF.
2
Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
appears on the top line of the display.
3
Press the scroll button ( or
) until “Adjust Shading ”
appears on the bottom line and press Enter.
4
Press the scroll button ( or
) to select “On” and press Enter.
Your machine picks up the paper and adjusts the shading value.
Cleaning Your Machine
To maintain the print quality, follow the cleaning procedures
below each time the toner cartridge is replaced or if print quality
problems occur.
below each time the toner cartridge is replaced or if print quality
problems occur.
N
OTES
:
• While cleaning the inside of the machine, be careful not to touch
the transfer roller, located underneath the toner cartridge. Oil
from your fingers can cause print quality problems.
from your fingers can cause print quality problems.
• Cleaning the cabinet of the machine with surfactants containing
large amounts of alcohol, solvent or other strong substances can
discolor or crack the cabinet.
discolor or crack the cabinet.
• Keep the machine away from flammable liquids, gases, and
aerosols. A fire or an electric shock might occur.
Cleaning the Outside
Clean the cabinet of the machine with a soft lint-free cloth. You
can dampen the cloth slightly with water, but be careful not to
be let any water drip onto the machine or inside of it.
can dampen the cloth slightly with water, but be careful not to
be let any water drip onto the machine or inside of it.