Справочник Пользователя для Ricoh LF 125 (H915)
M
AINTENANCE
7.11
7
Cleaning the Drum
If there are streaks or spots on your print, the OPC drum of the
cartridge may require cleaning.
cartridge may require cleaning.
1
Before setting the cleaning procedure, make sure that
paper is loaded in the machine.
paper is loaded in the machine.
2
Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
appears on the top line of the display.
The first available menu item, “Clean Drum,” displays on
the bottom line.
the bottom line.
3
Press Enter.
4
When the display asks you to confirm your selection, press Enter.
The machine prints a cleaning page. Toner particles on the
drum surface are affixed to the paper.
drum surface are affixed to the paper.
5
If the problem remains, repeat steps 1 through 4.
Ignoring the Toner Empty Message
When the toner cartridge is empty, the machine shows a
“[[Toner Empty]]” message and stops printing.
“[[Toner Empty]]” message and stops printing.
You can set the machine to ignore the message when it displays
and to continue printing the pages.
and to continue printing the pages.
1
Press Menu until “Machine Setup” appears on the display.
2
Press the scroll button ( or
) until “Ignore Toner”
appears on the bottom line and press Enter.
3
Press the Scroll button ( or
) to select “On” or “Off.”
Select “On” to ignore the Toner Empty message.
Select “Off” to stop printing when the message appears.
This is the default setting.
This is the default setting.
4
Press Enter to save the selection.