Справочник Пользователя для Ricoh MP 6000
Copier/Document Server Features
92
3
Edit
This section describes the user tools in the Edit menu under Copier/Document
Server Features.
Default settings are shown in bold type.
Enter the width of the binding margin with the number keys as follows:
• Metric version: 0–30 mm (in increments of 1 mm)
• Inch version: 0"-1.2" (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
• Metric version: 2–99 mm (in increments of 1 mm)
• Inch version: 0.1"-3.9" (in increments of 0.1 inch)
An image of approximately 1.5 mm (0.06”) will not be displayed as the width of
the separation line, when specifying solid or broken lines.
Server Features.
Default settings are shown in bold type.
Enter the width of the binding margin with the number keys as follows:
• Metric version: 0–30 mm (in increments of 1 mm)
• Inch version: 0"-1.2" (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
• Metric version: 2–99 mm (in increments of 1 mm)
• Inch version: 0.1"-3.9" (in increments of 0.1 inch)
An image of approximately 1.5 mm (0.06”) will not be displayed as the width of
the separation line, when specifying solid or broken lines.
❖ Front Margin: Left / Right
You can specify left and right margins on the front side of copies in Margin
Adjustment mode.
The default setting is Left, 5 mm (Metric version) / Left, 0.2" (Inch version).
Adjustment mode.
The default setting is Left, 5 mm (Metric version) / Left, 0.2" (Inch version).
❖ Back Margin: Left / Right
You can specify left and right margins on the back side of copies in Margin
Adjustment mode.
The default setting is Right, 5 mm (Metric version) / Right, 0.2" (Inch ver-
sion).
Adjustment mode.
The default setting is Right, 5 mm (Metric version) / Right, 0.2" (Inch ver-
sion).
❖ Front Margin: Top / Bottom
You can specify top and bottom margins on the front side of copies in Margin
Adjustment mode.
The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).
Adjustment mode.
The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).
❖ Back Margin: Top / Bottom
You can specify top and bottom margins on the back side of copies in Margin
Adjustment mode.
The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).
Adjustment mode.
The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).
❖ 1 Sided→2 Sided Auto Margin: TtoT
In 1 sided to 2 sided Duplex mode, you can specify the margins on the back
side.
The margin is set to the same value of “Back Margin: Left / Right”.
The default setting is Right, 5 mm (Metric version) / Right, 0.2" (Inch ver-
sion).
side.
The margin is set to the same value of “Back Margin: Left / Right”.
The default setting is Right, 5 mm (Metric version) / Right, 0.2" (Inch ver-
sion).
❖ 1 Sided→2 Sided Auto Margin: TtoB
In 1 sided to 2 sided Duplex mode, you can specify the margins on the back
side.
The value set for “Back Margin: Top / Bottom” is used.
The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).
side.
The value set for “Back Margin: Top / Bottom” is used.
The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).