Справочник Пользователя для Ricoh MP 6000
Network Settings
25
1
Reference
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
an Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
an Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. When both Ethernet and wireless LAN (IEEE 802.11b) are connected,
the selected interface takes precedence.
the selected interface takes precedence.
Reference
Heading
Setting Item
Setting Requirements
Interface Settings/Network Machine IPv4 Address
Necessary
Interface Settings/Network IPv4 Gateway Address
As required
Interface Settings/Network DNS Configuration
As required
Interface Settings/Network DDNS Configuration
As required
Interface Settings/Network Domain Name
As required
Interface Settings/Network WINS Configuration
As required
Interface Settings/Network Effective Protocol
Necessary
Interface Settings/Network LAN Type
Necessary
Interface Settings/Network Ethernet Speed
As required
Interface Settings/Network Permit SNMPv3 Communication
As required
Interface Settings/Network Permit SSL / TLS Communication
As required
Interface Settings/Network Host Name
As required