Справочник Пользователя для Ricoh MP 6000
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
System Settings
52
2
Parallel Interface
This section describes the user tools in the Parallel Interface menu under Inter-
face Settings.
Default settings are shown in bold type.
face Settings.
Default settings are shown in bold type.
❖ Parallel Timing
Sets the timing for the control signal of the parallel interface.
The default setting is ACK Outside.
The default setting is ACK Outside.
❖ Parallel Communication Speed
Sets the communication speed for the parallel interface.
The default setting is High Speed.
The default setting is High Speed.
❖ Selection Signal Status
Sets the level for the select signal of the parallel interface.
The default setting is High.
The default setting is High.
❖ Input Prime
Sets whether to validate or invalidate the input prime signal upon receipt.
The default setting is Inactive.
The default setting is Inactive.
❖ Bidirectional Communication
Sets the printer's response mode to a status acquisition request when using a
parallel interface.
The default setting is On.
When set to [Off], bidirectional communication function will be disabled. Al-
so, printer driver will not be installed under Windows Auto Detect function.
parallel interface.
The default setting is On.
When set to [Off], bidirectional communication function will be disabled. Al-
so, printer driver will not be installed under Windows Auto Detect function.
❖ Signal Control
Sets procedure to error during printing.
The default setting is Job Acceptance Priority.
The default setting is Job Acceptance Priority.