Справочник Пользователя для Sharp MX-7001

When a fax is transmitted to the machine, the machine automatically receives and prints the fax.

A beep sounds when reception ends.

• System Settings (Administrator): Speaker Settings

This is used to change the volume and tone of the reception beep.

• System Settings (Administrator): Number of Calls in Auto Reception

This is used to change the number of rings on which fax reception begins automatically. To receive faxes without 
the machine ringing, select "0" rings.

• If a password entry screen appears...

A password must be entered to print the received fax. When the correct password is entered, the received fax is 
printed.

☞

 (page 57)

• The output tray and stapling (when a finisher is installed) can be selected.

The number of copies of received faxes that are printed and the output tray can be selected. When a finisher is 
installed, the number of copies printed, the output tray, and stapling can be selected. For more information, see the 
System Settings Guide.

• If printing of a copy job or print job is in progress when a fax is received, the fax will not be printed until the previously 

reserved job is completed.

• Received faxes will not be printed when the machine cannot print due to an error condition such as out of paper, out of 

toner, or a paper misfeed. The faxes will be printed automatically when the error condition is cleared. (If the machine ran 
out of paper, touch the [OK] key in the touch panel after loading paper.

• When received faxes cannot be printed, the faxes can be forwarded to another fax machine.

☞

 (page 58)

System Settings (Administrator): Duplex Reception Setting
This is used to have received faxes printed on both sides of the paper.